Vera Port Scanning

Community Playground General Discussions
1

I’ve run into a bit of an issue with my vera doing port scans. My brother laser printer is popping out of sleep mode every 20-30 minutes. I looked through the logs and based on the timing it looks like the vera port scans are waking it up. Oddly this is a new issue even though I’ve had the vera for several months and the printer has been here the entire time. I’m on UI5 and here is the log information.

08 10/19/14 6:23:47.398 JobHandler_LuaUPnP::HandleActionRequest device: 0 service: urn:micasaverde-com:serviceId:HomeAutomationGateway1 action: LogIpRequest <0x32b5b680> 08 10/19/14 6:23:47.398 JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1 <0x32b5b680> 08 10/19/14 6:23:47.399 JobHandler_LuaUPnP::HandleActionRequest argument action=LogIpRequest <0x32b5b680> 08 10/19/14 6:23:47.399 JobHandler_LuaUPnP::HandleActionRequest argument IpAddress=192.168.1.149 <0x32b5b680> 08 10/19/14 6:23:47.399 JobHandler_LuaUPnP::HandleActionRequest argument MacAddress=xx.xx.xx.xx.xx.xx <0x32b5b680>

I found this old thread about it which links to an open bug request.

http://forum.micasaverde.com/index.php/topic,3688.msg18132.html#msg18132

Does anyone know how to stop vera from doing this?

2

Sorry, I think I found the answer. Should have gone down a few more in my search results. I’ll post back if this doesn’t fix it.

http://forum.micasaverde.com/index.php/topic,12773.msg109293.html#msg109293

Simply using the UI-provided checkbox to not 'auto detect devices on my home network' has stopped that incessant chatter, as mentioned earlier in this thread. I haven't needed to modify the xml.