In my Serial Port configuration
I see two entries…
it seems that the second one is the one that I have to select for the Ademco Panel.
So, why is there two entries here? (latest firmware, VeraPlus).
Also, after a reboot, I sometimes have to go back in and reconnect the ‘Used by device’. Any idea why it doesn’t stick?
Name: ftdi_sio1
Path: /dev/ttyUSB0
Device Number: usb-rt3883-ohci-1
Port: 3481
Name: ftdi_sio
Path:
Device Number: usb-xhci-hcd-1
Port: 3482