I wan’t to add a smoke sensor fibaro on my vera2 controler, but it seems to be uncompatible with 1.5.622 firmware. I wan’t to upgrade it for a last one such as 1.5.672 or 1.5.673 but i don’t know where can i found it.
ther is someone who know how can i get this firmware please.
The Vera 2 can not run UI5 … that last release that supports Vera 2 is UI4.
Vera2 UI5 firmware through
http://cp.mios.com/firmware/
Unsure of the last release.
And… Maybe install the following app
http://apps.mios.com/plugin.php?id=3846
Looking at the old thread it would appear, 1.5.672/3 was never distributed by MCV and therefore, you will need to raise a support ticket.
yeah - im running vera2, ui5 and 1.5.673 which vera support installed for me after i was having problems with a zwave.me controller.
support ticket should get it sorted
My bad … Vera 2 is not supported by UI6 or UI7.
But chances are the latest UI5 release will still not support these newer Z-Wave devices.
You’re on your own.
UI5 1.5.672 beta firmware.
Are you sure that firmware is working with Vera2 if I download firmware file from your link. If you download that, you get file: rt3662_Luup_ui5-1.5.672-en-mios.squashfs. (I have that in my Vera3.)
If I check my old firmware backup files, I can see that my Vera2 have now firmware file:
wl500gP_Luup_ui5-1.5.346-en-mios.squashfs
and my Vera3 had before beta firmware this:
rt3662_Luup_ui5-1.5.346-en-mios.squashfs
So file names are (were) totally different for Vera2 and Vera3 and also file sizes are different (Vera2 4714496 and Vera3 4341760)
Now I am quite sure that link above is not right firmware for Vera2. I found this beta firmware file for Vera2:
wl500gP_Luup_ui5-1.5.673-en-mios.squashfs.
Probably that is right one for my Vera2. (Sorry I am not giving address to download page because I think that it is not allowed to do that)
Who can give me the link to download this firmware?
Best Home Automation shopping experience. Shop at Ezlo!
© 2024 Ezlo Innovation, All Rights Reserved. Terms of Use | Privacy Policy | Forum Rules