Not sure when this error started. I only noticed it when I tried to add a new device. I could add the device but then it won’t configure. Started checking and Vera 2 won’t communicate with any z-wave device.
Zwave settings:
Version 3.20 L:1
House/Node
Role Master SIS:NO PRI:YES
Last update N/A
Firmware: You are running the latest version: 1.1.1362 . << this doesn’t seem right?
Ran an update to latest firmware with no changes in behavior. –
Log file results after heal:
=======NEIGHBOR NODE UPDATES=======
Node 2 Device 3 Front Office Thermostat neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
Node 3 Device 4 IMP/Conf Thermostat neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
Node 4 Device 12 Marks Heater neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
Node 5 Device 13 Chrissie’s Heater #2 neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
Node 6 Device 14 Lunch Room neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
Node 13 Device 46 _Appliance Module neighbor nodes updated 0 times (incomplete 5 in a row 0), woke up 0 times configured: NO
=======STRESS TEST RESULT=======
Node 2 Device 3 Front Office Thermostat
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
Node 3 Device 4 IMP/Conf Thermostat
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
Node 4 Device 12 Marks Heater
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
Node 5 Device 13 Chrissie’s Heater #2
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
Node 6 Device 14 Lunch Room
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
Node 13 Device 46 _Appliance Module
Test: NOP Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Basic_Get Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
Test: Get Node Info Sent 2 test frames and 0 succeeded (0%) with average of 0.000000 seconds and maximum of 0.000000 seconds
–HEALTH SCORE: 0–
=======NEIGHBOR NODE RESULT=======
Node 2 Device 3 Front Office Thermostat took 0.66337000 seconds to report neighbors:
Node 3 Device 4 IMP/Conf Thermostat took 0.36378000 seconds to report neighbors:
Node 4 Device 12 Marks Heater took 0.36559000 seconds to report neighbors:
Node 5 Device 13 Chrissie’s Heater #2 took 0.36274000 seconds to report neighbors:
Node 6 Device 14 Lunch Room took 0.36530000 seconds to report neighbors:
Node 13 Device 46 _Appliance Module took 0.36403000 seconds to report neighbors:
Inversely:
=======EDGE NODE PROFILE=======
=======DETAILED LOG=======
–Stage #1 started: 11-11-28 16:28:03 completed: 11-11-28 16:28:03 successful: N
—11-11-28 16:18:14 Job unknown
–Stage #2 started: 11-11-28 16:18:14 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:18:14 Pass 0/5 Updating neighbors for node 2
—11-11-28 16:18:24 Job job#7 :heal_neighbor_node 2 (0x771a10) P:70 S:4 was Successful
—11-11-28 16:18:24 Pass 0/5 Updating neighbors for node 3
—11-11-28 16:18:35 Job job#8 :heal_neighbor_node 3 (0x769440) P:70 S:4 was Successful
—11-11-28 16:18:35 Pass 0/5 Updating neighbors for node 4
—11-11-28 16:18:45 Job job#9 :heal_neighbor_node 4 (0x906008) P:70 S:4 was Successful
—11-11-28 16:18:45 Pass 0/5 Updating neighbors for node 5
—11-11-28 16:18:56 Job job#10 :heal_neighbor_node 5 (0x845870) P:70 S:4 was Successful
—11-11-28 16:18:56 Pass 0/5 Updating neighbors for node 6
—11-11-28 16:19:06 Job job#11 :heal_neighbor_node 6 (0x770588) P:70 S:4 was Successful
—11-11-28 16:19:06 Pass 0/5 Updating neighbors for node 13
—11-11-28 16:19:17 Job job#12 :heal_neighbor_node 13 (0x770d78) P:70 S:4 was Successful
—11-11-28 16:19:17 Pass 1/5 Updating neighbors for node 2
—11-11-28 16:19:28 Job job#16 :heal_neighbor_node 2 (0x8cfb40) P:70 S:4 was Successful
—11-11-28 16:19:28 Pass 1/5 Updating neighbors for node 3
—11-11-28 16:19:38 Job job#17 :heal_neighbor_node 3 (0x76bee0) P:70 S:4 was Successful
—11-11-28 16:19:38 Pass 1/5 Updating neighbors for node 4
—11-11-28 16:19:49 Job job#18 :heal_neighbor_node 4 (0x829180) P:70 S:4 was Successful
—11-11-28 16:19:49 Pass 1/5 Updating neighbors for node 5
—11-11-28 16:19:59 Job job#19 :heal_neighbor_node 5 (0x8520d8) P:70 S:4 was Successful
—11-11-28 16:19:59 Pass 1/5 Updating neighbors for node 6
—11-11-28 16:20:10 Job job#20 :heal_neighbor_node 6 (0x833a18) P:70 S:4 was Successful
—11-11-28 16:20:10 Pass 1/5 Updating neighbors for node 13
—11-11-28 16:20:20 Job job#21 :heal_neighbor_node 13 (0x8ac2b8) P:70 S:4 was Successful
—11-11-28 16:20:20 Pass 2/5 Updating neighbors for node 2
—11-11-28 16:20:30 Job job#22 :heal_neighbor_node 2 (0x844530) P:70 S:4 was Successful
—11-11-28 16:20:30 Pass 2/5 Updating neighbors for node 3
—11-11-28 16:20:40 Job job#23 :heal_neighbor_node 3 (0x8cf5e0) P:70 S:4 was Successful
—11-11-28 16:20:40 Pass 2/5 Updating neighbors for node 4
—11-11-28 16:20:51 Job job#24 :heal_neighbor_node 4 (0x81a010) P:70 S:4 was Successful
—11-11-28 16:20:51 Pass 2/5 Updating neighbors for node 5
—11-11-28 16:21:02 Job job#25 :heal_neighbor_node 5 (0x76f748) P:70 S:4 was Successful
—11-11-28 16:21:02 Pass 2/5 Updating neighbors for node 6
—11-11-28 16:21:12 Job job#26 :heal_neighbor_node 6 (0x769898) P:70 S:4 was Successful
—11-11-28 16:21:12 Pass 2/5 Updating neighbors for node 13
—11-11-28 16:21:22 Job job#27 :heal_neighbor_node 13 (0x824180) P:70 S:4 was Successful
—11-11-28 16:21:22 Pass 3/5 Updating neighbors for node 2
—11-11-28 16:21:32 Job job#28 :heal_neighbor_node 2 (0x768270) P:70 S:4 was Successful
—11-11-28 16:21:32 Pass 3/5 Updating neighbors for node 3
—11-11-28 16:21:43 Job job#29 :heal_neighbor_node 3 (0x771a10) P:70 S:4 was Successful
—11-11-28 16:21:43 Pass 3/5 Updating neighbors for node 4
—11-11-28 16:21:53 Job job#30 :heal_neighbor_node 4 (0x7691a8) P:70 S:4 was Successful
—11-11-28 16:21:53 Pass 3/5 Updating neighbors for node 5
—11-11-28 16:22:04 Job job#31 :heal_neighbor_node 5 (0x8b73e8) P:70 S:4 was Successful
—11-11-28 16:22:04 Pass 3/5 Updating neighbors for node 6
—11-11-28 16:22:14 Job job#32 :heal_neighbor_node 6 (0x903088) P:70 S:4 was Successful
—11-11-28 16:22:14 Pass 3/5 Updating neighbors for node 13
—11-11-28 16:22:25 Job job#33 :heal_neighbor_node 13 (0x8b4d28) P:70 S:4 was Successful
—11-11-28 16:22:25 Pass 4/5 Updating neighbors for node 2
—11-11-28 16:22:35 Job job#34 :heal_neighbor_node 2 (0x770d78) P:70 S:4 was Successful
—11-11-28 16:22:35 Pass 4/5 Updating neighbors for node 3
—11-11-28 16:22:45 Job job#35 :heal_neighbor_node 3 (0x8cfb40) P:70 S:4 was Successful
—11-11-28 16:22:45 Pass 4/5 Updating neighbors for node 4
—11-11-28 16:22:56 Job job#36 :heal_neighbor_node 4 (0x76bee0) P:70 S:4 was Successful
—11-11-28 16:22:56 Pass 4/5 Updating neighbors for node 5
—11-11-28 16:23:07 Job job#37 :heal_neighbor_node 5 (0x829180) P:70 S:4 was Successful
—11-11-28 16:23:07 Pass 4/5 Updating neighbors for node 6
—11-11-28 16:23:17 Job job#38 :heal_neighbor_node 6 (0x8520d8) P:70 S:4 was Successful
—11-11-28 16:23:17 Pass 4/5 Updating neighbors for node 13
—11-11-28 16:23:27 Job job#39 :heal_neighbor_node 13 (0x833a18) P:70 S:4 was Successful
—11-11-28 16:23:27 Neighbor Update Done
–Stage #3 started: 11-11-28 16:23:27 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:23:27 Routing update node 2
—11-11-28 16:23:27 Job job#40 :heal_routing_node 2 (0x8ac2b8) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update node 3
—11-11-28 16:23:27 Job job#41 :heal_routing_node 3 (0x762328) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update node 4
—11-11-28 16:23:27 Job job#42 :heal_routing_node 4 (0x81ddb0) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update node 5
—11-11-28 16:23:27 Job job#43 :heal_routing_node 5 (0x81d070) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update node 6
—11-11-28 16:23:27 Job job#44 :heal_routing_node 6 (0x76ace0) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update node 13
—11-11-28 16:23:27 Job job#45 :heal_routing_node 13 (0x8d8198) P:70 S:4 was Successful
—11-11-28 16:23:27 Routing update done
–Stage #4 started: 11-11-28 16:28:03 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:23:32 Calculate Routes Done
–Stage #5 started: 11-11-28 16:23:32 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:23:32 Configure node 2
—11-11-28 16:23:43 Job job#46 :conf_jh#2 (0x8212d8) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:23:43 Configure node 3
—11-11-28 16:23:53 Job job#48 :conf_jh#3 (0x843798) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:23:53 Configure node 4
—11-11-28 16:24:05 Job job#50 :conf_jh#4 (0x81e0e8) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:24:05 Configure node 5
—11-11-28 16:24:17 Job job#52 :conf_jh#5 (0x76f748) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:24:17 Configure node 6
—11-11-28 16:24:27 Job job#54 :conf_jh#6 (0x81bff8) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:24:27 Configure node 13
—11-11-28 16:24:38 Job job#56 :conf_jh#13 (0x82a0d0) P:70 S:3 was Aborted: Unable to get any information on node
—11-11-28 16:24:38 Configure Done
–Stage #6 started: 11-11-28 16:28:03 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:24:38 No battery nodes
–Stage #7 started: 11-11-28 16:24:38 completed: 11-11-28 16:28:03 successful: Y
—11-11-28 16:24:42 Node Details heal 2
—11-11-28 16:24:56 Node Details heal 2
—11-11-28 16:25:10 Node Details heal 3
—11-11-28 16:25:25 Node Details heal 3
—11-11-28 16:25:39 Node Details heal 4
—11-11-28 16:25:54 Node Details heal 4
—11-11-28 16:26:08 Node Details heal 5
—11-11-28 16:26:23 Node Details heal 5
—11-11-28 16:26:38 Node Details heal 6
—11-11-28 16:26:53 Node Details heal 6
—11-11-28 16:27:07 Node Details heal 13
—11-11-28 16:27:22 Node Details heal 13
—11-11-28 16:27:32 Stress test Done