Working with the details for this device on http://www.pepper1.net/zwavedb/device/774 (extract below)
Does anyone know how to figure out the values for 101-103? Ideally I’d like the device to report pretty much everything every 60 seconds, or at least the Watts and kWh.
I want to log the data into Datamine or similar.
Paramter No.
101
Size
4
Default
Name
Reports in Group 1
Description
Which reports will be sent in Report group 1.
Type
bitset
Values
0 → Auto send Meter REPOR T (for voltage at the group time interval
1 → Auto send Meter REPORT (for current) at the group time interval
2 → Auto send Meter REPORT (for watt) at the group time interval
3 → Auto send Meter REPORT (for kWh) at the group time interval
4 - 31 → (Reserved)
Paramter No.
102
Size
4
Default
Name
Reports in Group 2
Description
Which reports will be sent in Report group 2.
Type
bitset
Values
0 → Auto send Meter REPORT (for kWh) at the group time interval
1 → Auto send Meter REPORT (for watt) at the group time interval
2 → Auto send Meter REPORT (for current) at the group time interval
3 → Auto send Meter REPOR T (for voltage at the group time interval
4 - 31 → (Reserved)
Paramter No.
103
Size
4
Default
Name
Reports in Group 3
Description
Which reports will be sent in Report group 3.
Type
bitset
Values
0 → Auto send Meter REPOR T (for voltage at the group time interval
1 → Auto send Meter REPORT (for current) at the group time interval
2 → Auto send Meter REPORT (for watt) at the group time interval
3 → Auto send Meter REPORT (for kWh) at the group time interval
4 - 31 →