VeraLIte UI5 - Inclusion problem with ST814 [SOLVED]

Other Devices & Integrations Climate Control & Temperature Sensors
1

Hi
I have a inclusion problem with my ST814 and VERA lite :frowning:
The worst part is that this is my second ST814 and I had no worries with the first one.

In fact, vera succeed in including the ST814, but she was mismanaging:

  • She puts the ST814 in “other” device and not Climate.
  • No temperature display

Here’s what I do:
-I go to Add Device on the Vera
-I click on Add next to “Add Zwave devices, like light switches, door locks, thermostats, etc
”
-Then I click on option 1 (left vera connected).
-The orange LED flashes and the interface display “New devices I 've found so far:” then nothing.
-I click 3 times in less than 1,5s on the button “C ° F °” on the ST814.
-Under the "New devices, the vera display this [url=http://i41.tinypic.com/2euqx6s.jpg] http://i41.tinypic.com/2euqx6s.jpg[/url]
(No Everspring thus :frowning: )
-I click Next and it shows this: http://i43.tinypic.com/11brsja.jpg
-Still no manufacturer.

-I finish inclusion on next and he creates a device and waits for the wakeup 
 : http://i41.tinypic.com/n2myio.jpg
-After 1 hour, she found the ST814 , but 
 does not display any temperature : http://i41.tinypic.com/ed05j.jpg

And in the device options, we see that Vera has finally found the Everspring
But choosing a generic device for ST814 :frowning:
Look at : http://i39.tinypic.com/352ge45.jpg

What’s wrong ?
Someone could give a screenshot of the icon displayed for a ST814 on a veralite ?

Regards
David

2

Your last screenshot shows exactly what my Vera displays for a functioning ST814: A device under “Other” using D_ComboDevice1.xml. Be aware that the ST814 displays as 3 devices on Vera: a parent device (the one you’re seeing on the “Other” page), and temperature and humidity devices on the “Sensors” page.

Have you checked the “Sensors” page to see if the other devices for the ST814 were created? Sometimes, Vera adds only the parent device upon inclusion, and will only create the child devices after an engine restart. Try restarting Vera’s LUA engine by clicking Reload in the top right corner of the web page. Then also refresh your browser (typically CTRL-F5 does this).

3

You are right.

It works with Reload + CTRL-F5

Not really a good UI interface 
 :frowning: