Leviton VRCS4-M0

Other Devices & Integrations Lighting & Load Control
1

Hello,

I have a VERA 3 controller running firmware 1.7.439. I’m trying to get a Leviton 4-scene controller VRCS4-M0 to control an Aeotec Micro Smart Dimmer 2nd Edition. Both devices have been included into my Z-Wave network.

I’ve been unable to get the scene controller to contol the Aeotech Micro Smart Dimmer module. I’ve created two scenes and associated them to button #1 of the scene controller.

[ul][li]Module On => Turn on module to 100%[/li]
[li]Module Off => Turn off module[/li][/ul]

[right][/right]Both scenes run in manual and the LED for button #1 is on when the Aeotec Micro Smart Dimmer is on, but I’m unable to get button #1 to trigger the “Module On” scene or “Module Off” scene.

2

I’m having the exact America problem here on a Vera 3.
Local load control is working fine, but making the scene controllers “control or execute” a scene is not working at all.

However, if executed on the Vera, then the damn LED on the Leviton lights up, just to sort of rub it in my face…

I didn’t have this issue with UI5…

3

I’ve noticed that the scene status time stamp is updated every time the corresponding button is pressed on the scene controller, but the output device isn’t triggered. The output device triggers fine if the scene is triggered manually.