LED Lights Don't Fully Turn Off With Relay Switch

[sparkejj]

@tedp

I am miffed as to why there would be any current flowing on the normally open part of the relay when the switch is off. I have an email into Leviton, and am still awaiting a response.

This, supposedly, is an email answer from Leviton, quoted in the topic I linked to earlier:

@oTi@

There is a slight bleed through in the cap that allows some electricity to flow through when “off”. This is why you still see your rope lights on at very low levels when the switch is off (the minimum recommended wattage is 14W on this switch because of this).

Are the LEDs under or over the 14W recommended minimum?