I have a Reactor sensor which is simply supposed to change the house mode from Home to Night and vice versa. Problem is, it seems like this RS is getting triggered more than once after quite a long delay (20 mins)…but I can’t see any flaws in the logic which would make it do that. So I think anot…

@LibraSun definitely has the right suggestion, and I’ll embellish a little bit: Since the event log in the Logic Summary is an in-memory structure, it gets lost on reboots/reloads. It also stores only the last 100 events by default. You can get more events logged, and persistence, by setting the Lo…

Have you read through the Reactor log(s)? (Under your sensor’s Tools > Troubleshooting & Support > Logic Summary link) It usually provides solid clues as to what is going on.

Ok thanks. This helped me figure it out. I had a Reactor sensor which one of the conditions was to monitor for no motion for a period of time in the entire house. Once true, the night mode was triggered. If the motion sensor was tripped afterwards, the RS reset and triggered again after the time …

Ezlo Community

How to troubleshoot Reactor?

Plugins & Plugin Development Reactor

Best Home Automation shopping experience. Shop at Ezlo!