Honeywell Z-Wave thermostat no longer reporting TEMP in energy mode

Other Devices & Integrations Climate Control & Temperature Sensors
1

So I’m not sure if it was a recent firmware upgrade or something changed w/ Vera, but I now notice that when I enter my ENERGY mode on my thermostat, it doesn’t update the TARGET temperature either on my Vera web app or phone. I can see when I go into the device that it’s in Energy mode and when I physically look at the thermostat it shows energy mode and the energy mode temp. Something is happening that it’s not reporting the target temp when in energy mode… Thoughts?

If I do a ENGINE RELOAD, once it’s back up the correct temp is displayed and when changing from ENERGY MODE back to the normal schedule it updates immediately, it’s just going form normal to energy.

2

HI,

I’m sorry I’m not able to help (I don’t use the ENERGY mode) :frowning:

However when you say

a recent firmware upgrade
are you referring to the Thermostat or Vera?

Thanks,
John

3

When Vera was updated this past one.

It also messed up my Alexa and now shows Vera offline.

4

[quote=“nutshellml, post:1, topic:199103”]So I’m not sure if it was a recent firmware upgrade or something changed w/ Vera, but I now notice that when I enter my ENERGY mode on my thermostat, it doesn’t update the TARGET temperature either on my Vera web app or phone. I can see when I go into the device that it’s in Energy mode and when I physically look at the thermostat it shows energy mode and the energy mode temp. Something is happening that it’s not reporting the target temp when in energy mode… Thoughts?

If I do a ENGINE RELOAD, once it’s back up the correct temp is displayed and when changing from ENERGY MODE back to the normal schedule it updates immediately, it’s just going form normal to energy.[/quote]

I have three of these and use energy savings mode a lot. But I am not expecting to see the energy savings temperature setting in the GUI. Meaning, for example, one of my ACs is in Energy Savings mode right now, and that set point is either 83 or 84 degrees - but the setpoint shown in the GUI is the 76 degrees of the normal mode.

Capabilities 211,156,0,4,8,6,L,R,B,RS,|32,39,49:3,64:2,66,67,68,69,114,133,134, Edit ManufacturerInfo 57,17,1 Edit VersionInfo 4,3,42,2,0 Edit Configured 1 Edit NodeInfo 20,27,31,40,42,43,44,45,72,85,86, Edit SetPointInfo H1,C1,F1,D1, Edit SupportedType OF,H1,C1,RS,H2,C2 Edit ConfiguredAssoc Edit ModeSetting 1:;2:;3:;4: Edit LastUpdate 1515356351 Edit FirstConfigured 1515356351 Edit Neighbors 1,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,20,21,22,23,24,25,26,27,28,29,30,32,33,34,35,36,37,38,39,40,41,42,43,44,45,47,49,50,51,52,53,54,55,58,59, Edit LastReset 1515356350 Edit AssociationNum 1 Edit ConsecutivePollFails 0 Edit PollRatings 5.00 Edit CurrentTemperature 79.00 Edit LastRouteUpdate 1525686333 Edit ModeStatus CoolOn Edit ModeState Idle Edit ModeStateForEnergy 1 Edit Mode Auto Edit TemperatureScale 1,1,2 Edit CurrentSetpoint Heat 70.00 Edit CurrentSetpoint 76.00 Edit AllSetpoints 70.00,76.00,73.00 Edit CurrentSetpoint Cool 76.00 Edit PollOk 8419 Edit LastPollSuccess 1525717323 Edit LastNnu 1525676400,62 Edit LastArr 1525676400,62 Edit ModeTarget CoolOn Edit EnergyModeTarget EnergySavingsMode Edit EnergyModeStatus EnergySavingsMode Edit Status 0 Edit SetpointTarget 74.00 Edit PollNoReply 2