Thanks much @ncwoody- that worked like a charm!
Thanks @ncwoody I just replaced the files in an installation that used to work, and it connected and seems to work fine. No extra work needed.
@CharlieH Did you just leave the MyQ app installed and then upload all the files provided by @ncwoody, including all the files in the 2 separate folders? Many thanks to you both, this would be a game changer in my house to get these working again.
Please, if you could give a little more details for the less technically challenged folks like myself.
@ShawninFL, I left the app installed, then just dragged the .xml. .lua, and .json files from the primary folder only into the LUUP Files upload box, and it started working.
1 Like
@ncwoody Thank you guys SO much for bringing this back to life. @CharlieH Thank you for your explanation for the novice. No doubt this will help others as well. Lovin it!!
Works like magic! AKA: The hours of hard work from a talented individual 
I did as @CharlieH suggested and copied the new .xml, .json. lua files and it immediately logged me in and i am now able to open and close the garage door.
The issue that i am having now and looking for some advice on is that I now get a message:
Event Watcher[22] : Startup Lua Failed
i found the Event Watched files on GitHub and uploaded them but that did not help so restored from back up and re-applied the MyQ update and i am still getting the same error (after updating MyQ).
First, please don’t think I’m being critical or picky. Very thankful for this miricle, believe me! Just curious if there’s a way to incorporate the MyQ devices (have 2 openers of 5 that use MyQ) to work with the traditional Garage Door Plugin. The GD plugin wants a switch device number and a contact sensor number. I use an old Imperihome version for controlling from my phone, I love the simplicity. Only thing I’m missing on my favorites page are these 2 openers.
Just as a personal wish list, again, so not being critical. The open close are inverted compared to the other lock switches. Maybe on a wish list for future tweaks.
MyQ device shows:
Closed is white to the left
Open is red to the right.
Traditional locks show:
Closed is red to the right
Open is white to the left.
A huge thanks ncwoody and CharlieH.
My garage doors are working with VERA once again.
Will be glad when they fix the VERA app issue…the app crashes when you add a door pin with specific dates
@akbooer I know this issue only popped up after installing the MyQ app but would you be able to help point me in a direction for troubleshooting?
Thanks much for getting this working again. My Chamberlan opener now works with VeraPlus again!
However, no icons on the MyQ device or Gateway. Checked the L_MyQGateway.lua, and the hex code is in there and appears to be identical to when I generate hex from the supplied .png files. Did I do something wrong at install to prevent the icons from generating?
Can anyone point me in a direction for troubleshooting? I’ve installed the new plugin in various ways. I can see the new device listed. But once I add the username/pwd, press update, a few seconds later I get the error “No Implemenation”. Does anyone know why this message comes up? Forgot to mention, it doesn’t detect any of the devices and it doesn’t update the last auth and update status.
Thanks for the work on this. Oddly my garage door doesn’t show up but the two a family member shared with me did when implemented.
Hi All - I just added the MyQ Hub to the garage. I loaded the plug-in and it seems like it was successful. It created a device, but there are no controls associated with the device itself.
App id :7386
Current Version:2.2
Latest Version 2.2
I added a device and it seemed like that worked.
Config: start configuration. This should not take more than 2 minutes.
Config: found device: 65 for app: 7386
Config: waiting app data for app: 7386
Config: found app data.
Config: config data was not found. Waiting for it…
Config: found config data.
Config: checking if user attention is required.
Config: Device doesn’t need configuration. Click Back to return to app list.
Config: it is now safe to exit this screen.
The problem is I don’t see any controls to control the door. What am I doing wrong?
Hi - how did you get it working? I am still having issues. I get an error when trying add username and password.
I don’t think I did anything special. After manually uploading the files via the Luup files upload. I just went to create device and set the values manually.
Here’s the info in my device params that you set manually when creating a device.
device_type: urn:schemas-macrho-com:device:MyQGateway:1
Upnp device_file: D_MyQGateway.xml
Upnp implementation filename/impl_file: I_MyQGateway.xml
After the device was created and I entered my credentials, I think it took a bit for the doors to show up. Also, I really haven’t played around with this as it actually pulled up a shared device controller I have access to, the doors are there though with status. Quickly looking into the code I can see how this happened. It’s only designed for a single device.
1 Like
Thanks for the comments, everyone. Somehow I had community notifications turned off so lost track of this thread. To be clear, I do not plan to provide ongoing support for this, it was time spent for selfish purposes but thought I could at least contribute back the new auth flow since it was a PITA to implement. Feel free to fork the repo and add more features.
Can you direct me for how to install the new files? Thanks
Got it, Followed the upload idea and it worked. thanks
With the Myq app not working had to install the fix. as stated recently. Now back to same issue. Cannot control door with ELAN, it shows up and has been assigned. Not sure what I am missing.?
Hi, I installed the ncwoody fix and got this working with my Chamberlin Garage doors. I’m not sure if I have it totally set up correctly as now I am missing the icons I used to have for the garage doors on the two garage door devices. Did I miss a step? or is this the way they look with the fix. The just say the name (Garage Door 1) and there is a simple slider switch, closed or open.
Can anyone let me know what their icons look like?
Thanks in advance.